High Gloss Black

Pro-Ject Debut Carbon Evolution High Gloss Black Turntable (Open Box)


Pro-Ject Debut Carbon Evolution High Gloss Black Turntable (Open Box)

Pro-Ject Debut Carbon Evolution High Gloss Black Turntable (Open Box)    Pro-Ject Debut Carbon Evolution High Gloss Black Turntable (Open Box)

The Evolution Building a great high-end turntable requires design expertise. Building a great & affordable turntable requires not only expertise, but also skilled engineering, flawless manufacturing, advanced material sciences, and relentless passion.

Creating a worthy successor to the legendary Debut Carbon required rethinking and reevaluating every component and each design choice. The new Debut Carbon EVO represents the epitome of Pro-Ject's philosophy: high performance, clean aesthetics, and superb value.

The elegant, simple aesthetic is unmarred by gimmicky lights, sliders, and buttons. It is a pure, high-performance turntable. Should requirements call for a phono preamp, Bluetooth or digital connectivity, USB interface, etc. We offer a wide range of external electronics, optimized for any application. Good Vibrations From the Record to You Vinyl playback starts with the cartridge, converting what's in the three-dimensional record groove to an electrical signal.

The new Sumiko Rainier phono cartridge combines superb trackability with uncanny accuracy and clarity without sacrificing smoothness. Factory mounted and aligned on an 8.6 low-mass carbon fiber tonearm, the Rainier offers a replaceable stylus that can be easily upgraded to a Sumiko Olympia or even a Moonstone!

In a matter of seconds. No need to replace the cartridge, reset the alignment nor rebalance the tonearm. The signal from the Rainier is transmitted via a single run of high quality copper wiring direct to high quality RCA connectors with a completely separate ground, preserving the balanced signal from the cartridge output. The Debut Carbon EVO is supplied with our Connect It E: a semi-balanced, low-capacitance cable with superior shielding designed specifically to carry the delicate phono signal. Modern Materials Meet Mass The main platter upon which the record is played should be heavy and non-resonant.

The Debut Carbon EVO approaches this problem by using our proven 12 steel platter, now lined around the outer edge (bottom side) with an anti-resonant thermo-plastic elastomer (TPE). The result is a heavier platter with minimal noise over an expertly engineered main bearing and sub-platter.

The added rotational mass enhances the flywheel effect, yielding reduced wow & flutter and higher stability while damping resonance. A Stable Stance The Debut Carbon EVO benefits from the huge range of higher-level design elements Pro-Ject has to offer, incorporating the special TPE-damped metal feet from our award winning X1 turntable. Not only do the vibration-absorbing feet help isolate the turntable, they are easy to adjust and leveling the turntable is now as simple as can be. A perfectly leveled, solid & stable platform is crucially important for proper vinyl playback. Vibes We Don't Want to Hear Motors vibrate. That is a challenge for any turntable designer to overcome as those vibrations can transfer to the tonearm and cartridge, negatively affecting sound quality. The Debut Carbon EVO features a new motor suspension system, decoupling the motor from the plinth to reduce the transfer of vibration. The only vibes we want are in the record grooves.

Leveraging advanced damping solutions with high-mass composite construction, we created the new motor suspension system using a steel plate and TPE decoupling to isolate the motor while ensuring the spindle is perfectly aligned with the sub-platter for impeccable speed stability and smooth transfer of rotational force. No Need to Watch Your Speed Many turntables utilize AC motors that rely on your power line to maintain the correct speed. Many are so erratic they have to provide speed-control which needs to be monitored and adjusted over time. Some high-end designs offer an additional, usually expensive external power controller to stabilize speed. The Debut Carbon Evolution implements a sophisticated onboard power control circuit that generates a very precise signal to ensure accurate and consistent speed regardless of power fluctuation.

There's no need for adjustment nor gimmicky lights and sliders. You can simply rely on spot-on accuracy. Given the increasing popularity of 9 and high-quality 45rpm records (due to their superior sound quality), we have incorporated electronic speed switching on the EVO.

The speed selector switch is cleverly integrated with the power switch under the front left corner, which also maintains the sleek ergonomic design the Debut is known for. Time for Evolution The heavy, solid MDF plinth is painstakingly layered with eight coats of paint, available in finishes that look and feel luxurious. Debut Carbon EVO is crafted in traditional high-gloss black, white and red as well as in beautiful satin finishes including new soft pastel colors and a real walnut veneer. The engineering and manufacturing are the culmination of decades of know-how, investment, and passion.

We build our products for the love of music, knowing that they might be handed down to future generations along with lovingly curated record collections. We have taken our most beloved turntable design and improved nearly every aspect of it. The result is an incredibly refined product with a price/performance ratio that sets a new standard. Speed: 33, 45/(78)rpm (electronic speed change).

Drive principle: belt drive, electronic speed control. Platter: 11.81, 3.75 lbs. Platter damping: TPE damping ring and felt mat. Main bearing: stainless steel, brass bushing. Wow & flutter: 33: +/-0.19%; 45: +/-0.17%. Speed drift: 33: +/-0.6%; 45: +/-0.7%. Tonearm: 8.6 carbon fiber one-piece tonearm tube. Effective arm length: 8.6. Included accessories: 15V DC / 0.8A power supply, dust cover. Power consumption: 4W / 0W standby. Dimensions (W x H x D): 16.34 x 4.45 x 12.60. Recommended load impedance: 47kohms (MM input). What's In The Box.

Sumiko Rainier phono cartridge (mounted & aligned). Drive belt for 33 1/3 & 45rpm. Connect It E phono cable with external ground wire. Boxes, APO or FPO addresses at this time.

You can count on OneCall to get your package there safe and on time. Orders are processed Monday - Friday. This is a safety measure designed to ensure that you receive your order. For example, if your package is simply left outside without your signature, the potential for loss increases considerably.

Expert Advice Our Spokane, WA, call center staff is highly trained, experienced and non-commissioned. At OneCall we pride ourselves on being able to answer all your questions about technology, product compatibility, quality, performance, connectivity and much more. Return of New & Original Condition Items. Some Items we Sell Are Not Returnable.

Pacific Saturday: Closed Sunday: Closed. The item "Pro-Ject Debut Carbon Evolution High Gloss Black Turntable (Open Box)" is in sale since Thursday, June 3, 2021.

This item is in the category "Consumer Electronics\TV, Video & Home Audio\Home Audio\Home Audio Components\Record Players/Home Turntables". The seller is "onecall" and is located in Spokane, Washington. This item can be shipped to United States.
  1. Brand: Pro-Ject
  2. MPN: PRO1130035-B
  3. Model: Debut Carbon Evolution High Gloss Black (Open Box)
  4. Color: Black

Pro-Ject Debut Carbon Evolution High Gloss Black Turntable (Open Box)    Pro-Ject Debut Carbon Evolution High Gloss Black Turntable (Open Box)