6009 Epoxy Concrete Floor Coating is 100% Solids. 6009 epoxy floor coating is an attractive all purpose low temperature, high build commercial grade epoxy designed to be extremely tough, durable impact and abrasion resistant with very good chemical resistance to corrosive waters and other chemicals. It is a 100% solids, 2:1 ratio plural component, self priming, no VOC, extremely tough advanced polymer structure. The 6009 is used to protect garage, show room, industrial floors, and general work areas. Can be applied up to 32 mils thick (50 sq'/gallon) down to 35F and rising note: cold temps will significantly extend recoat and back in-service times.
Coverage rate for 6009 depends on how thick applied. At 100% solids, nothing lost to evaporation after it dries (compare to 50% solids epoxy at big box stores which lose 1/2 of material in container to evaporation). For 5 mil thick application, 6009 coverage rate is 320 sq'/gallon or 960 sq' total area with 3 gallon kit.This is fine for basement or light foot traffic only projects. For garage floors recommended 10 mils minimum (160 sq'/gallon) epoxy basecoat thickness. One 3 gallon kit of 6009 protects most 2 car garages, covering 480 sq' at 10 mils thick in a one coat application (applied at 160 sq'/gallon). For additional abrasion and chemical protection, recommend our 5500 Polyaspartic as a clear, high gloss, UV resistant protective topcoat. One 2 gallon kit of 5500 Polyaspartic Clear is all you need as a topcoat for a 480 sq', 2 car garage. When applying chips/flakes can apply them to the colored 6009 basecoat and then topcoat with a clear version of either the 6009 or 5500.
Using a clear topcoat over a colored basecoat also adds depth to the visual appearance and enhances the look. If a primer is needed, see our companion 7001 Polyurethane Primer. The 6009 can also be used as an effective outdoor concrete patch repair.Mix with sand, 2 parts sand + 1 part 6009 and when applied it will meet or exceed strength of surrounding concrete. One 3 gallon kit of 6009 mixed with sand will fill 1,410 cubic inches (23,100 cubic cm) of a hole or crack. Comes in high gloss clear or 6 color options in 3 gallon & 15 gallon kits.
See How to Apply tab for application instructions. Where is 6009 typically used? Why 6009 Epoxy Floor Coating? Protective and attractive color coat epoxy flooring system.
Designed to seal floors against abrasion, water, oils and chemicals. Wide application temperature range 35°F to 125°F (1.7°C to 52°C). Quick re-coat time 4-5 hours (at 75F).Self Priming With No Primer Required. 100% solids, 2 part, no VOC, low odor. Excellent protective coating at low cost per Mil DFT (dry film thickness). Black, Dark Gray, Light Gray, Tan, white. Varies with temperature & humidity. Notched trowel or squegee, roller. 35°F to 125°F (air and surface) and 5°F above dew point. Carbamation Test (scale 1 to 5). Minimum 28 days after new pour. PART A ONLY (1 GALLON). PART B ONLY (1 GALLON). PLEASE CONTACT CUSTOMER SERVICE FOR QUESTIONS. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Paint, Stain & Varnish\Interior & Exterior Paint". The seller is "exteriorcoatings" and is located in this country: US. This item can be shipped to United States.