The top layer is composed of carbon fiber material bonded to the hood surface with high-grade epoxy resin, and finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating for a high gloss finish. A one-piece, smooth underside shell is fused to the top layer enhancing the products structural integrity. The edges are smoothed by hands to insure good quality finish all around.
In 2014, we further improved on this manufacturing process by introducing the Vacuum Infusion Process V. , which utilizes a single-mold vacuum to produce parts that are 10-20% lighter than before while improving durability.
We are transitioning our full spectrum of carbon parts to use the VIP process so that our customers can enjoy these improved products without incurring a huge cost increase. All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.
These parts are require minor to significant modification and are designed for PROFESSIONAL AFTERMARKET INSTALLATION ONLY. Auto shops experienced in OEM installations may not be experienced in aftermarket fiberglass installation. Failure to use professional aftermarket installation will void all warranties and return policies, if applicable. Due to the materials used in production, the body kits will not be a direct bolt-on.
These body kits may require prepping, heating, sanding, shaving, filling gaps, cutting, or other extensive body work. All fitment return case is require to provide a ASE.
Certified body shop business name, info, business license and installation receipt. We will not accept any return case that do not meet the requirements. When the part arrives, open the box and wrapping to inspect the entire part for any damage at all, BEFORE signing anything (regardless how good OR bad the box looks). Should there be damage, pictures MUST be taken of the issue and any other damage/flaws on the box.
Scratches, Surface blemishes, and Small hairline fractures are common, both will be addressed by the shop during prep. If anything was wrong at all, damage, flaw or otherwise and you do not want to keep it and fix, write Damaged on the receipt, refuse it and do not write or say ANYTHING else to the driver since they may manipulate or misinterpret what you say to take responsibility off themselves.
You do not have to elaborate on anything you put, so the best advice is to not offer up anything. SURFACE FINISH: Grade-A Carbon Fiber Material. SPECIAL NOTE: These products are intended for off-road use only!
PRODUCT FEATURES-2: UV-Protective Polyurethane Coating. PRODUCT FEATURES-3: Vacuum Infusion Process. OTHER PART NUMBER: F510M-CF4MA, FEA0M-CF4MA. 100% Brand new and Never used.
Professionals installation in highly recommended (No instruction included). Visually inspect the physical condition of the cartons for any rips, tears, punctures, crushed corners etc. If damaged is discovered after the driver has left, contact the shipper and carrier IMMEDIATELY. Keep the packaging and damaged contents for later inspection.
Please write "Refused Due to Damage" on the receipt, then sign appropriately. These special order items have a 2 week lead time but can take up to 8 weeks to process.
Count the number of cartons and verify the quantity being received. Please write Refused Due to Damage on the receipt, then sign appropriately.
There is no return for any parts that have been used, modified, painted, or installed. Return authorization will NOT be issued after 5 days of the receipt of the product(s) by the customer. A Return Requisition must be filled out completely prior for any return. That it came with originally. Damaged products are not considered defective and wrong products ordered by you are not considered wrong products sent due to our fault.
All returnable items must be carefully packed in original packaging or better if the original packaging is not in good condition. Installation: All parts must be prepped and installed by a professional body shop that has experience working with carbon fiber car parts.
Policy on Guaranteed fitment: If there is a fitment issue we will need to see full length pictures of the issue. Test fit items before installation. Parts that have been altered can NOT be return. Althought 95% of our product arrives in 1-2 weeks it can take up to 2 months to receive product.
If a backorder occurs you do have the option to cancel your order without any penalty. While most emails are answered within 12 hours please allow up to 48 hours to receive a response. We are not in on weekends or holidays. The item "FOR 07-08 Nissan 350Z VIS Racing High Gloss Black OE Real Carbon Fiber Hood" is in sale since Wednesday, June 10, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Hoods".
The seller is "xpectrum" and is located in Fullerton. This item can be shipped to United States.